Publications

Vibration Based Characterization of Tool Wearing in Micro-milling of Ceramics During Waveform Toolpath
Authors:
László Móricz, Zsolt János Viharos
Title of journal:
Gradus
DOI:

https://doi.org/10.47833/2022.1.ENG.003

ISSN (or eSSN):
ISSN 2064-8014
2022
Autonomous Vehicle Drift With a Soft Actor-critic Reinforcement Learning Agent
Authors:
Tóth, Sz. H.; Bárdos, Á.; Viharos Zs. J.
Title of journal:
IEEE 20th Jubilee World Symposium on Applied Machine Intelligence and Informatics
DOI:

10.1109/SAMI54271.2022.9780803

2022
Tool failure recognition using inconsistent data
Authors:
Júlia Bergmann, Klaudia Éva Zeleny, József Váncza, Andrea Kő
Title of journal:
Procedia CIRP CIRP CMS 2022
DOI:

https://doi.org/10.1016/j.procir.2022.05.132

2022
Recent Developments and Future Challenges in Incremental Sheet Forming of Aluminium and Aluminium Alloy Sheets
Authors:
Trzepieciński, T; Najm, S M ; Oleksik, V ; Vasilca, D ; Paniti, I ; Szpunar, M
Title of journal:
Metals
DOI:

https://www.mdpi.com/2075-4701/12/1/124/htm

ISSN (or eSSN):
2075-4701
2022
Emerging Trends in Single Point Incremental Sheet Forming of Lightweight Metals
Authors:
Trzepieciński, T.; Oleksik, V.; Pepelnjak, T.; Najm, S.M.; Paniti, I.; Maji, K.
Title of journal:
Metals
DOI:

https://www.mdpi.com/2075-4701/11/8/1188/htm

ISSN (or eSSN):
2075-4701
2021
Drilling fibre reinforced polymer composites (CFRP and GFRP): An analysis of the cutting force of the tilted helical milling process
Authors:
Csongor Pereszlai, Norbert Geier, Dániel István Poór, Barnabás Zoltán Balázs, György Póka
Title of journal:
Composite Structures
DOI:

https://www.sciencedirect.com/science/article/pii/S0263822321001070?via%...

ISSN (or eSSN):
0263-8223 ISSN
2021
Vibration based characterization of tool wearing in micro-milling of ceramics
Authors:
Móricz, L.; Viharos, Z. J..
Title of journal:
Measurement: Sensors
DOI:

https://www.sciencedirect.com/science/article/pii/S2665917421001379

2021
Effect of lead time prediction accuracy in trust-based resource sharing
Authors:
Ádám Szaller, Botond Kádár
Title of journal:
IFAC PapersOnline
DOI:

https://www.sciencedirect.com/science/article/pii/S2405896321008934?via%...

ISSN (or eSSN):
ISSN: 2405-8963
2021
Parametric Effects of Single Point Incremental Forming on Hardness of AA1100 Aluminium Alloy Sheets
Authors:
Najm, S.M.; Paniti, I.; Trzepieciński, T.; Nama, S.A.; Viharos, Z.J.; Jacso, A.
Title of journal:
Materials
DOI:

https://www.mdpi.com/1996-1944/14/23/7263/htm

ISSN (or eSSN):
1996-1944
2021
Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations
Authors:
Norbert Geier, Jinyang Xu, Csongor Pereszlai, Dániel István Poór, J. Paulo Davim
Title of journal:
Procedia Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2351978921001815

ISSN (or eSSN):
2351-9789 ISSN
2021
Vibration-based tool life monitoring for ceramics micro-cutting under various toolpath strategies
Authors:
Viharos, Z. J.; Móricz, L.; Büki, M. I.
Title of journal:
ACTA IMEKO
DOI:

https://www.sciencedirect.com/science/article/pii/S2665917421001379

2021
Industry 4.0 readiness in manufacturing: Company Compass 2.0, a renewed framework and solution for Industry 4.0 maturity assessment
Authors:
Gábor Nick, Botond Kádár
Title of journal:
Procedia Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2351978921001402

ISSN (or eSSN):
2351-9789 ISSN
2021
Adaptive, Hybrid Feature Selection (AHFS)
Authors:
Zsolt János Viharos, Krisztián Balázs Kis, Ádám Fodor, Máté István Büki
Title of journal:
Pattern Recognition
DOI:

https://www.sciencedirect.com/science/article/pii/S0031320321001199

ISSN (or eSSN):
ISSN: 0031-3203
2021
Human-robot collision predictor for flexible assembly
Authors:
Imre Paniti, János Nacsa, Péter Kovács, Dávid Szur
Title of journal:
ACTA IMEKO
DOI:

https://acta.imeko.org/index.php/acta-imeko/article/view/IMEKO-ACTA-10%2...

ISSN (or eSSN):
ISSN 2221-870X
2021
Complementary Manipulator Tool Development for Safe Cobot-Assisted Hydroponics
Authors:
Imre Paniti, János Nacsa, Dávid Szűr, Sándor Rácz, József Tóth
DOI:

https://hjic.mk.uni-pannon.hu/index.php/hjic/article/view/1150

ISSN (or eSSN):
2450-5102
2021
Predict the Effects of Forming Tool Characteristics on Surface Roughness of Aluminum Foil Components Formed by SPIF Using ANN and SVR
Authors:
Sherwan Mohammed Najm, Imre Paniti
Title of journal:
International Journal of Precision Engineering and Manufacturing
DOI:

https://link.springer.com/article/10.1007/s12541-020-00434-5

ISSN (or eSSN):
2234-7593
2021
A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges
Authors:
Dániel István Poór, Norbert Geier, Csongor Pereszlai, Jinyang Xu
Title of journal:
Composites Part B: Engineering
DOI:

https://www.sciencedirect.com/science/article/pii/S1359836821005357?via%...

2021
Platform and direct exchange-based mechanisms for resource sharing in distributed manufacturing: a comparison
Authors:
Ádám Szaller, Botond Kádár
Title of journal:
CIRP Annals Manufacturing Technology
DOI:

https://www.sciencedirect.com/science/article/pii/S000785062100072X

ISSN (or eSSN):
ISSN: 0007-8506
2021
Reinforcement Learning for Statistical Process Control in Manufacturing
Authors:
Viharos Z. J.; Jakab, R. B.
Title of journal:
Measurement
DOI:

https://www.sciencedirect.com/science/article/pii/S0263224121005881

2021
Expert System for the Machine Learning Pipeline in Manufacturing
Authors:
M. Frye, J. Krauß, R. H. Schmitt
Title of journal:
17th IFAC Symposium on Information Control Problems in Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2405896321007175

ISSN (or eSSN):
ISSN: 2405-8963
2021
Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF
Authors:
Sherwan Mohammed Najm, Imre Paniti
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://link.springer.com/article/10.1007/s00170-021-06712-4

ISSN (or eSSN):
0268-3768
2021
Benchmarking of Data Preprocessing Methods for Machine Learning Applications in Production
Authors:
Maik Frye, Johannes Mohren, Robert H. Schmitt
Title of journal:
Procedia CIRP CIRP CMS
DOI:

https://www.sciencedirect.com/science/article/pii/S2212827121009070

2021
A two-step digitalization level assessment approach for manufacturing companies
Authors:
Günther Schuh, Thomas Scheuer, Gábor Nick, Ádám Szaller, Tamás Várgedő
Title of journal:
Procedia Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2351978921001384

ISSN (or eSSN):
2351-9789 ISSN
2021
Integrating maintenance strategies in autonomous production control using a cost-based model
Authors:
Glawar, R.; Ansari, F.; Viharos, Z. J.; Matyas, K.; Sihn, W.
Title of journal:
ACTA IMEKO
DOI:

https://acta.imeko.org/index.php/acta-imeko/article/view/IMEKO-ACTA-10%2...

2021
Enabling distance learning and remote collaboration in layout and process planning
Authors:
Zsolt Kemény, Richárd Beregi, Mátyás Hajós, János Csempesz, János Nacsa
Title of journal:
SSRN, Proceedings of the Conference on Learning Factories (CLF) 2021
DOI:

https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3858609

ISSN (or eSSN):
1556-5068 ISSN
2021
Microsecond measurement resolution for process cycle diagnostics of micro-EDM milling
Authors:
Viharos, Z. J.; Farkas, B. Zs.
Title of journal:
Measurement: Sensors
DOI:

https://doi.org/10.1016/j.measen.2021.100123

2021
Optimizing the numerical algorithm in Fast Constant Engagement Offsetting Method for generating 2.5D milling tool paths
Authors:
Jacsó, Á.; Szalay, T.
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-020-05452-1

2020
A cost-based model for integrating maintenance strategies in autonomous production control
Authors:
Glawar, R.; Ansari, F.; Viharos, Zs. J.; Matyas, K.; Sihn, W.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Moduláris szerelési paletta oktatási célú kollaboratív robotos munkaállomáshoz
Authors:
Szűr, D.; Nacsa, J.; Beregi, R.; Kemény, Z.
Title of journal:
XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Development of the Supply Chain Management 2040 – Opportunities and challenges
Authors:
Schiffer, M.; Dörr, D. M.
Title of journal:
Opportunities and challenges. 1st Conference on Production Systems and Logistics
DOI:

https://doi.org/10.15488/9644

2020
Intelligent production of the future – first results of a survey
Authors:
Nick, G.; Szaller, Á.; Viharos, Zs. J.; Várgedő, T.; Bányai, D.; Fries, C.; Fechter, M.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
VR and Depth Camera based Human-Robot Collision Predictor System with 3-Finger Gripper Assisted Assembly Device
Authors:
Imre Paniti, János Nacsa, Péter Kovács, Dávid Szűr
Title of journal:
23rd International Symposium on Measurement and Control in Robotics
DOI:

https://eprints.sztaki.hu/10008/

ISSN (or eSSN):
978-1-6654-0479-2
2020
Kodácsy, J.: Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials
Authors:
Kovács, Zs. F.; Viharos, Zs. J.
Title of journal:
Measurement
DOI:

https://doi.org/10.1016/j.measurement.2020.107750

2020
A stochastic approach to calculate assembly cycle times based on spatial shop-floor data stream
Authors:
Bergmann, J.; Gyulai, D.; Morassi, D.; Váncza, J.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.04.024

2020
Condition Monitoring Concept for Industrial Robots
Authors:
Uhlmann, E.; Polte, J.; Geisert, C.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Off-line geometrical and microscopic & on-line vibration based cutting tool wear analysis for micro-milling of ceramics
Authors:
Móricz, L.; Viharos, Z. J., Németh, A.; Szépligeti, A.; Büki, M.
Title of journal:
Measurement
DOI:

https://doi.org/10.1016/j.measurement.2020.108025

2020
Identification and characterization of challenges in the production environment of the future for the application of data-based technologie
Authors:
Schuh, G.; Scholz, P.; Nadicksbernd, M.
Title of journal:
IEEE Information Technology and Management Science Conference 2020
DOI:

10.1109/ITMS51158.2020.9259318

2020
Joint optimization of product tolerance design, process plan, and production plan in high-precision multi-product assembly
Authors:
Tsutsumi, D.; Gyulai, D.; Kovács, A.; Tipary, B.; Ueno, Y.; Nonaka, Y.; Fujita, K.
Title of journal:
Journal of Manufacturing Systems
DOI:

https://doi.org/10.1016/j.jmsy.2020.01.004

2020
Böngésző alapú felhasználói felület Panda robothoz
Authors:
Bocsi, K.; Nacsa, J.
Title of journal:
XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Contribution to the industry-specific identification and selection of a business model in machinery and equipment industry
Authors:
Bauernhansl, T.; Dörr, D. M.
Title of journal:
1st Conference on Production Systems and Logistics
DOI:

https://doi.org/10.15488/9643

2020
Beyond the profit motive: Environmentally conscious (re)design of supply chain structures
Authors:
Monostori, J.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.03.033

2020
Reinforcement Learning for Statistical Process Control in Manufacturing
Authors:
Viharos, Zs. J.; Jakab, R. B.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Study on Effecting Parameters of Flat and Hemispherical end Tools in SPIF of Aluminium Foils
Authors:
Najm, S. M.; Paniti, I
Title of journal:
Journal Tehnički vjesnik – Technical Gazette (TV-TG)
DOI:

https://hrcak.srce.hr/248218

ISSN (or eSSN):
ISSN 1330-3651 (Print), ISSN 1848-6339 (Online)
2020
Experimental and Numerical Investigation of Single Point Incremental Forming of Aluminium Alloy Foils
Authors:
Paniti, I., Viharos, Z.J., Harangozó, D. and Najm, S.M.
Title of journal:
ACTA IMEKO
DOI:

http://dx.doi.org/10.21014/acta_imeko.v9i1.750

2020
CCMS Model – a Novel Approach to Digitalization Level Assessment for Manufacturing Companies
Authors:
Nick, G.; Szaller, À.; Várgedő, T.
Title of journal:
European conference on management, leadership and governance
ISSN (or eSSN):
ISSN 2048-9021
2020
Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs
Authors:
Pereszlai, Cs.; Geier, N.
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-019-04842-4

2020
Identification and analysis of the technology potential of machine learning systems in the production of the future
Authors:
Schuh, G.; Scholz, P.; Leich, T.; May, R.
Title of journal:
IEEE Information Technology and Management Science Conference 2020
DOI:

10.1109/ITMS51158.2020.9259303

2020
Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites
Authors:
Geier, N.
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-020-06163-3

2020
A review on micro-milling: recent advances and future trends
Authors:
Barnabás Zoltán Balázs, Norbert Geier, Márton Takács, J. Paulo Davim
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://link.springer.com/article/10.1007/s00170-020-06445-w

2020
A constraint model for assembly planning
Authors:
Kardos, Cs.; Kovács, A.; Váncza, J.
Title of journal:
Journal of Manufacturing Systems
DOI:

https://doi.org/10.1016/j.jmsy.2019.11.007

2020
Robotos pakolási feladat megoldása környezetérzékelés segítségével
Authors:
Hajós, M.; Horváth, D.
Title of journal:
XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Lubricants and Affecting Parameters on Hardness in SPIF of AA1100 Aluminum
Authors:
Paniti, I.; Najm, S. M.; Viharos, Zs. J.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Adaptive network analytics for managing complex shop-floor logistics
Authors:
Gyulai, D,; Bergmann, J.; Váncza, J.
Title of journal:
CIRP Annals-Manufacturing Technology
DOI:

https://doi.org/10.1016/j.cirp.2020.04.002

2020
Allocating raw materials to competing projects
Authors:
Péter, E.; Tamás, K.
Title of journal:
Computers & Industrial Engineering
DOI:

https://doi.org/10.1016/j.cie.2020.106386

2020
Case study on technological applications for production planning and control in the context of Industry 4.0
Authors:
Schuh, G.; Patrick, S.
Title of journal:
1st Conference on Production Systems and Logistics
DOI:

https://doi.org/10.15488/9683

2020
Lessons Learned from the COVID-19 Pandemic and Their Possible Consequences on Manufacturing
Authors:
Monostori, L.; Váncza, J.
Title of journal:
Smart and Sustainable Manufacturing Systems 4
DOI:

https://doi.org/10.1520/SSMS20200063

2020
Effect of CAM Path Strategies on Tool Life in Ceramics Micro-Cutting
Authors:
Móricz, L.; Viharos, Zs. J.; Büki, M.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Univerzális mechanikus megfogó vizsgálata optikai elven működő erőmérő használatával
Authors:
Nagy, A. T.; Paniti, I.
Title of journal:
Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Proceedings of the 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
Authors:
Viharos, Zs. J.; Ciani, L.; Bilski, P.; Jakovcic, M.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Adaptive Scheduling through Machine Learning-based Process Parameter Prediction
Authors:
Frye, M.; Gyulai, D.; Bergmann, J.; Schmitt, R.
Title of journal:
MM Journal
DOI:

10.17973/MMSJ.2019_11_2019051.

2020
Bio-inspired control of automated stem cell production
Authors:
Egri, P.; Csáji, B. Cs.; Kis, K. B.; Monostori, L.; Váncza, J.; Ochs, J.; Jung, S.; König, N.; Schmitt, R.; Brecher, C.; Pieske, S.; Wein, S.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.05.105.

2020
Comprehensive Comparison of MTM and BasicMOST, as the Most Widely Applied PMTS Analysis Methods
Authors:
Viharos, Zs. J.; Bán, B.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
A mutualistic framework for sustainable capacity sharing in manufacturing
Authors:
Szaller, Á.; Pedone, G.; Egri, P.; Szalóki, Á.; Nick, G.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.04.024

2020
Recent advances in learning content and infrastructure development for layout and process planning courses at the SZTAKI learning factories
Authors:
Kemény, Zs.; Beregi, R.; Tipary, B.; Abai, K.; Nacsa, J.
Title of journal:
10th Conference on Learning Factories
DOI:

https://doi.org/10.1016/j.promfg.2020.04.024

2020
Structured Data Preparation Pipeline for Machine Learning-Applications in Production
Authors:
Frye, M.; Schmitt, R. H.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Heterogeneous String Stability of Unidirectionally Interconnected MIMO LTI Systems.
Authors:
Rödönyi, Gábor
2019 (published)
Smart Cyber-Physical System applications in production and logistics: special issue editorial
Authors:
Elisabeth Ilie-Zudor, Davy Preuveneers, Anikó Ekárt & Eckhard Hohwieler
Title of journal:
International Journal of Computer Integrated Manufacturing
DOI:

https://doi.org/10.1080/0951192X.2019.1616152

2019 (published)
The fast constant engagement offsetting method for generating milling tool paths.
Authors:
Adam Jacso, Gyula Matyasi, Tibor Szalay
Title of journal:
The International Journal of Advanced Manufacturing Technology.
DOI:

https://doi.org/10.1007/s00170-019-03834-8

2019 (published)
Physical Internet – a Novel Application Area for Industry 4.0
Authors:
Puskas, Eszter & Bohács, Gábor
Title of journal:
International Journal of Engineering and Management Sciences
DOI:

10.21791/IJEMS.2019.1.19.

2019 (published)
The effect of radial rake angle on chip thickness in the case of face milling. Proceedings of the Institution of Mechanical Engineers
Authors:
György Póka, István Németh
Title of journal:
Part B: Journal of Engineering Manufacture
DOI:

https://doi.org/10.1177/0954405419849245

2019 (published)
The effects of machining strategies of magnetic assisted roller burnishing on the resulted surface structure
Authors:
Kovács, Zsolt Ferenc and Viharos, Zsolt János and Kodácsy, János
2019 (published)
Layout configuration, maintenance planning and simulation of AGV based robotic assembly systems
Authors:
Németh, I.; Püspöki, J.; B. Viharos, A.; Zsóka, L.; Pirka, B.
Title of journal:
9th IFAC Conference on Manufacturing Modelling, Management and Control
DOI:

10.1016/j.ifacol.2019.11.433

2019
Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review
Authors:
Norbert Geier, J Paulo Davim, Tibor Szalay
DOI:

10.1016/j.compositesa.2019.105552

2019
Cycloid Approximation with Circle for the Calculation of Exit Angle
Authors:
Póka, Gy.; Németh I.
Title of journal:
Tehnički Vjesnik
DOI:

10.17559/tv-20170712162549

2019
Issues in Manufacturing Automation & Robotics within the Past 4 Decades and Vision for the Next
Authors:
Haidegger, G. and Paniti, I.
ISSN (or eSSN):
ISBN 9781728112138
2019
Adaptive scheduling through machine learning-based process parameter prediction
Authors:
Frye, M.; Gyulai, D.; Bergmann, J.; H. Schmitt, R.
Title of journal:
Conference on High Speed Machining
ISSN (or eSSN):
ISSN 1805-0476
2019
Influence of fixturing setup on quality of edge trimmed UD-CFRP
Authors:
Pereszlai, Cs.; Geier, N.; Poór, D.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
Magnetic Assisted Ball Burnishing of Magnetizable and Non-Magnetizable Materials
Authors:
Zsolt Ferenc Kovács, Zsolt János Viharos, János Kodácsy, Roland Sándor
ISSN (or eSSN):
ISBN 978-92-990084-1-6
2019
Technological Trends in Context of Industry 4.0 and Their Industrial Applications
Authors:
Schuh, G.; Scholz, P.; Patzwald, M.
Title of journal:
60th International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS)
DOI:

10.1109/ITMS47855.2019.8940720

2019
A pilot experimental research on drilling of cfrp under tensile stress
Authors:
Poór, D.; Geier, N.; Pereszlai, Cs.; Forintos, N.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
Conceptual Design of an Integrative Autonomous Production Control Model in association with a Prescriptive Maintenance Model (PriMa)
Authors:
"Robert Glawar, Fazel Ansari, Csaba Kardos, Kurt Matyas, Wilfried Sihn"
Title of journal:
26th CIRP Life Cycle Engineering (LCE) Conference
2019
Quality Improvement of Milling Processes Using Machine Learning-Algorithms
Authors:
Maik Frye, Robert H. Schmitt
ISSN (or eSSN):
ISBN 978-92-990084-1-6
2019
Monitoring of orbital drilling process in CFRP based on digital image processing of characteristics of uncut fibres
Authors:
Geier, N.; Póka, Gy.; Pereszlai, Cs.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2019.09.011

2019
Passivity analysis of rational LPV systems using Finslers lemma
Authors:
Polcz, P.; Kulcsár, B.; Péni, T.; Szederkényi, G.
Title of journal:
IEEE CDC 2019: Annual Conference on Decision and Control
DOI:

https://doi.org/10.1109/CDC40024.2019.9029877

2019
Usability investigation of portable coordinate measuring equipment
Authors:
Gábriel, M.; Czampa, M.; Szalay, T.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
"PriMa: a prescriptive maintenance model for cyber-physical production systems"
Authors:
Fatel Ansari, Robert Glawar, Tanja Nemeth
Title of journal:
International Journal of Computer Integrated Manufacturing
2019
Bilevel programming approach to demand response management with day-ahead tariff
Authors:
Kovács, A.
Title of journal:
Journal of Modern Power System and Clean Energy
DOI:

https://doi.org/10.1007/s40565-019-0569-7

2019
Simulation Framework for Evaluating Production Networks
Authors:
Egri, P.; Váncza, J.; Szaller, Á.; Monostori, J.
Title of journal:
Middle-European Conference on Applied Theoretical Computer Science
ISSN (or eSSN):
ISSN 2630-371X
2019
Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0 (SP48)
Authors:
Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S.
Title of journal:
State-of-the-Art and Outlook Proceedings of the 10th Knowledge Management in Digital Work Environments
DOI:

doi.org/10.34678/opus4-2412

2019
The examination of the effect of variable cutting speeds on the surface and edge qualities of milled granite materials
Authors:
Gyurika, I. G.; Szalay, T.
Title of journal:
Advance in Mechanical Engineering
DOI:

https://doi.org/10.1177/1687814019836319

2019
A hybrid simulation tool to improve the energy efficiency in production environment
Authors:
Zhou, B.; Frye, M.; Sander, C.; Schmitt R. H.
Title of journal:
IEEE International Conference on Systems, Man and Cybernetics (SMC)
DOI:

10.1109/SMC.2019.8914514

2019
Pilot factories in the frame of centre of excellence in production informatics and control
Authors:
Czampa, M.; Szalay, T.; Nacsa J.; Nausch, M.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
Episodes of Robotics and Manufacturing Automation Achievements from the Past Decades and Vision for the Next Decade
Authors:
Haidegger, G.; Paniti, I.
Title of journal:
Acta Polytechnica Hungarica
DOI:

https://doi.org/10.12700/APH.16.10.2019.10.8

2019
Towards a connected factory: Shop-floor data analytics in cyber-physical environments
Authors:
Gyulai, D.; Bergmann, J.; Gallina, V.; Gaal, A.
Title of journal:
7th CIRP Global Web Conference, Towards shifted production value stream patterns inference of data, models and technology
DOI:

10.1016/j.procir.2020.01.016

2019
Product quality and cutting tool analysis for micro-milling of ceramics
Authors:
L Móricz, Zs. J. Viharos, A. Németh, A. Széplige
2019
Determination of the working gap and optimal machining parameters for magnetic assisted ball burnishing
Authors:
Kovacs, Zsolt; Kodácsy, János; Viharos, Zsolt
Title of journal:
Measurement, Volume 118
2018 March (published)
A Novel Big-data-based Estimation Method of Side-slip Angles for Autonomous Road Vehicles
Authors:
Fényes, Dániel & Nemeth, Balazs & Gáspár, Péter
DOI:

10.5220/0006849504200426

ISSN (or eSSN):
ISBN: 978-989-758-321-6
2018 (published)
Reconfiguration control of in-wheel electric vehicle based on battery state of charge
Authors:
A. Mihály and P. Gáspár
DOI:

10.23919/ECC.2018.8550283

2018 (published)
Annihilator design for linear parameter varying systems
Authors:
Szabo, Zoltan & Peni, Tamas & Bokor, József
Title of journal:
IFAC-PapersOnLine. Volume 51, Issue 24.
DOI:

https://doi.org/10.1016/j.ifacol.2018.09.701

2018 (published)
Side-slip Angle Estimation of Autonomous Road Vehicles Based on Big Data Analysis
Authors:
Fenyes, Daniel & Nemeth, Balazs & Asszonyi, Mate & Gáspár, Péter
Title of journal:
2018 26th Mediterranean Conference on Control and Automation (MED)
DOI:

10.1109/MED.2018.8443010

2018 (published)
Trochoid milling of carbon fibre-reinforced plastics (CFRP)
Authors:
Geier, Norbert & Szalay, Tibor & Biró, István
Title of journal:
Procedia CIRP, Volume 77, 2018,
DOI:

https://doi.org/10.1016/j.procir.2018.09.039

2018 (published)
Computational method for estimating the domain of attraction of discrete-time uncertain rational systems
Authors:
Polcz, Peter & Péni, Tamás & Szederkényi, Gábor
Title of journal:
European Journal of Control, Volume 49
2018 (published)
Anti-Lock Braking Control Design for Electric Vehicles Using LPV Methods
Authors:
B. Németh, M. Fazekas and P. Gáspár
DOI:

10.1109/MED.2018.8442426

ISSN (or eSSN):
Electronic ISSN: 2473-3504
2018 (published)
Transformations for linear parameter varying systems
Authors:
Szabo, Zoltan & Bokor, József.
Title of journal:
IFAC-PapersOnLine, Volume 51, Issue 26.
DOI:

https://doi.org/10.1016/j.ifacol.2018.11.163

2018 (published)
Experimental Investigation on the Single Point Incremental Forming of AlMn1Mg1 Foils using Flat End Tools
Authors:
Najm, Sherwan & Paniti, Imre
Title of journal:
IOP Conference Series: Materials Science and Engineering
DOI:

10.1088/1757-899X/448/1/012032

2018 (published)
PRODUCTION LOG DATA ANALYSIS FOR REJECT RATE PREDICTION AND WORKLOAD ESTIMATION
Authors:
Pfeiffer, András & Gyulai, Dávid & Szaller, Ádám & Monostori, Laszlo
DOI:

10.1109/WSC.2018.8632482

2018 (published)
Evaluation, ranking and positioning of measurement methods for pellet production
Authors:
Konrád, Krisztina; Viharos, Zsolt; Németh, G.
ISSN (or eSSN):
ISSN 0263-2241
2018 (published)
Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation
Authors:
Móricz, L. and Viharos, Zsolt János and Németh, A. and Szépligeti, A.
Title of journal:
IOP Conference Series: Journal of Physics: Conference Series, 1065
DOI:

10.1088/1742-6596/1065/10/102003

2018 (published)
Generating Human Work Instructions from Assembly Plans
Authors:
Kardos, Cs.; Kovács, A.; Pataki, B.E.; Váncza, J.
2018 (published)
Towards joint optimization of product design, process planning and production planning in multi-product assembly
Authors:
3. Tsutsumi, D.; Gyulai, D.; Kovács, A.; Tipary, B.; Ueno, Y.; Nonaka, Y.; Monostori, L
ISSN (or eSSN):
ISSN 0007-8506 10.1016
2018
CONCEPTION AN INTELLIGENT NODE ARCHITECTURE FOR INTRALOGISTICS
Authors:
Gábor Bohács; Dániel Gáspár; Dorina Kánya
Title of journal:
Acta logistica - International Scientific Journal about Logistics
DOI:

DOI: 10.22306/al.v5i2.82

ISSN (or eSSN):
ISSN 1339-5629
2018
Corporate Governance: The evaluation based approach to the governance and business models of the EPIC CoE
Authors:
László Monostori, Botond Kádár, Gábor Nick, András Pfeiffer, Tamás Várgedő, Fabian Hecklau
Title of journal:
ECMLG 14th European Conference on Management Leadership and Governance
2018
New perspectives in production control: situation-aware decision making with machine learning approaches
Authors:
Dávid Gyulai, András Pfeiffer, Viola Gallina
Title of journal:
68th CIRP General Assembly
2018
Lead time prediction in a flow-shop environment with analytical and machine learning approaches
Authors:
Gyulai, D., Pfeiffer, A., Nick, G., Gallina, V., Sihn, W., Monostori, L.
Title of journal:
IFAC INCOM 2018 conference
2018
Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates
Authors:
Geier, Norbert; Szalay, Tibor; Takacs, Marton
DOI:

10.1007/s00170-018-2895-8

2018
A discrete simulation-based algorithm for the technological investigation of 2.5D milling operations
Authors:
Adam Jacso, Tibor Szalay, Juan Carlos Jauregui, Juvenal Rodriguez Resendiz
Title of journal:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
DOI:

DOI:10.1177/0954406218757267

ISSN (or eSSN):
ISSN: 0954-4062
2018
Roadmapping towards industrial digitalization based on an Industry 4.0 maturity model for manufacturing enterprises
Authors:
Andreas Schuhmacher, Tanja Nemeth, Wilfried Sihn
Title of journal:
Procedia CIRP, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering
2018
Lead time prediction using machine learning
Authors:
Lingitz, L., V. Gallina, F. Ansari, D. Gyulai, A. Pfeiffer, W. Sihn, L. Monostori
Title of journal:
CIRP CMS 2018 conference
DOI:

https://doi.org/10.1016/j.procir.2018.03.148

2018
Machinability analysis of carbon fibre-reinforced plastics using compression tools
Authors:
Balázs SOMOSKŐI,Norbert GEIER
Title of journal:
BÁNKI KÖZLEMÉNYEK1.évfolyam 3.szám
2018
Analysing and Optimizing 2.5D Circular Pocket Machining Strategies
Authors:
Jacsó Ádám, Szalay Tibor
Title of journal:
Lecture Notes in Mechanical Engineering
DOI:

DOI: 10.1007/978-3-319-68619-6_34

ISSN (or eSSN):
ISBN:978-3-319-68619-6
2018
Digital Twin in manufacturing: A categorical literature review
Authors:
Werner Kritzinger, Matthias Karner, Georg Traar, Jan Henjes, Wilfried Sihn
Title of journal:
16th IFAC Symposium on Information Control Problems in Manufacturin
2018
Design of the optimal motions of autonomous vehicles in intersections through neural networks.
Authors:
Nemeth, Balazs & Gáspár, Péter & Szőcs, Dávid & Mihály, András
Title of journal:
IFAC-PapersOnLine, Volume 51, Issue 9
DOI:

https://doi.org/10.1016/j.ifacol.2018.07.004

2018
Supply chains’ robustness: Challenges and opportunities
Authors:
Monostori, J.
Title of journal:
Procedia CIRP, 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering
DOI:

DOI: 10.1016/j.procir.2017.12.185

ISSN (or eSSN):
ISSN: 2212-8271
2018
Simulation and scheduling of AGV based robotic assembly systems
Authors:
Andor Viharos, István Németh
Title of journal:
IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018)
2018
A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Authors:
Klaudia Kovacs; Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
DOI:

https://doi.org/10.1007/978-3-662-58485-9_10 (published)

2018
INTEGRATING MACHINE TOOL CONDITION MONITORING AND PRODUCTION SCHEDULING IN METAL FORMING
Authors:
Matthias KARNER, Robert GLAWAR, Wilfried SIHN, Kurt MATYAS
Title of journal:
International Conference Management of Technology – Step to Sustainable Production (MOTSP 2018)
2018
The four steps approach of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Authors:
Hecklau, F.; Orth, R.; Kidschun, F.; Nick, G
Title of journal:
ECMLG 14th European Conference on Management Leadership and Governance
2018
A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Authors:
Klaudia Kovacs; Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
Title of journal:
ML4CPS 2018 (Machine Learning for Cyber Physical Systems and Industry 4.0)
2018
Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP)
Authors:
Geier Norbert, Szalay Tibor
Title of journal:
Measurement
DOI:

DOI: 10.1016/j.measurement.2017.07.007

ISSN (or eSSN):
ISSN: 0263-2241
2017
Improving the Accuracy of Cycle Time Estimation for Simulation in Volatile Manufacturing Execution Environments
Authors:
Pfeiffer A., Gyulai D., Monostori L.
Title of journal:
ASIM 2017 Conference
ISSN (or eSSN):
ISBN: 978-3-7376-0192-4 (print), ISBN: 978-3-7376-0193-1 (ebook)
2017
Engineering Support Systems for Industrial Machines and Plants
Authors:
Youichi Nonaka, Takahiro Nakano, Kenji Ohya, Atsuko Enomoto, Gábor Erdős, József Váncza, Gergely Horváth
Title of journal:
Advances in Through-life Engineering Services
2017
How to Achieve Physical Internet through Lean Principles and Industry 4.0?
Authors:
Gizem Erboz, Dr. Gábor Bohács, Dr. Zoltán Szegedi
Title of journal:
4. Wissenschaftliche Industrielogistik-Dialog 2017 (WiLD 2017)
ISSN (or eSSN):
ISBN-13: 978-3745016314
2017
An approach for the integration of anticipative maintenance strategies within a production planning and control model
Authors:
Robert Glawar, Matthias Karner, Tanja Nemeth,b, Kurt Matyas, Wilfried Sihn
Title of journal:
Proceedings of 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering
2017
Investigation of Micro Milled Surface Characteristics
Authors:
B Z Balázs, T Szalay, M Takács
Title of journal:
International Conference on Innovative Technologies: IN-TECH 2017
ISSN (or eSSN):
ISSN 0184-9069
2017
Application of generic CAD models for supporting feature based assembly process planning
Authors:
Kardos Cs., Váncza J.
Title of journal:
Procedia CIRP, 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering
2017
Decomposition approach to optimal feature-based assembly planning
Authors:
Kardos Cs., Kovács A., Váncza J.
Title of journal:
CIRP Annals -- Manufacturing Technology
DOI:

10.1016/j.cirp.2017.04.002

2017
Dynamical Aspects of Micro Milling Process
Authors:
M Takács, B Z Balázs, J C Jáuregui
Title of journal:
International Conference on Innovative Technologies: IN-TECH 2017
ISSN (or eSSN):
ISSN 0184-9069
2017
Simulation model study for manufacturing effectiveness evaluation in crowdsourced manufacturing
Authors:
Kaihara T., Katsumura Y., Suginishi Y., Kádár B.
Title of journal:
CIRP Annals -- Manufacturing Technology
DOI:

10.1016/j.cirp.2017.04.094

2017
Human–robot collaborative assembly in cyber-physical production: classification framework and implementation
Authors:
Xi Vincent Wang, Zsolt Kemény, József Váncza, Lihui Wang
Title of journal:
CIRP Annals -- Manufacturing Technology
DOI:

10.1016/j.cirp.2017.04.101

2017
The influence of the machining parameters on the quality of the holes made by μEDM in electrically conductive alumina-oxide
Authors:
Balázs Zsolt FARKAS1, László CSORBA Tibor SZALAY, Valery V. KUZIN, Sergei YU. FEDOROV
Title of journal:
SOLID STATE PHENOMENA
DOI:

DOI: 10.4028/www.scientific.net/SSP.261.101

ISSN (or eSSN):
ISSN: 1662-9779
2017
Human Resources Management: Meta-Study – Analysis of Future Competences in Industry 4.0
Authors:
Hecklau, F.; Orth, R.; Kidschun, F.; Kohl, H.
Title of journal:
Proceedings 13th European Conference on Management Leadership and Governance (ECMLG)
2017
Cyber-physical manufacturing in the light of Professor Kanji Ueda's legacy
Authors:
Váncza J, Monostori L
Title of journal:
Procedia CIRP, 50th CIRP CMS Conference
DOI:

10.1016/j.procir.2017.04.059

2017
Conceptual Design of an Integrated Autonomous Production Control Model in association with a Prescriptive Maintenance Model (PriMa)
Authors:
Glawar, Robert; Ansari, Fazel; Kardos, Csaba; Matyas, Kurt; Sihn, Wilfried
Title of journal:
Procedia CIRP, Volume 80
DOI:

https://doi.org/10.1016/j.procir.2019.01.047

2019
Effect of cutting parameters on section borders of the empirical specific cutting force model for cutting with micro-sized uncut chip thickness
Authors:
Biró, István & Szalay, Tibor & Geier, Norbert
Title of journal:
Procedia CIRP, Volume 77
DOI:

https://doi.org/10.1016/j.procir.2018.09.015

Structured Analysis of Methodologies for the Assessment of the Technological Capability of RTOs – Using a Method Engineering Approach
Authors:
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Title of journal:
ECIE 2020 - 15th European Conference on Innovation and Entrepreneurship
ISSN (or eSSN):
ISBN 1912764687, 9781912764686
The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Authors:
Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
ISSN (or eSSN):
ISBN 9781912764020; 9781912764013
Analyzing the Role of Research and Technology Organizations (RTOs) in National Innovation Systems (NIS)
Authors:
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Title of journal:
ECMLG 2020 - 16th European Conference on Management Leadership and Governance
ISSN (or eSSN):
ISBN 1912764776, 9781912764778
Detection filter design for homogeneous multi-agent networks.
Authors:
Szabo, Zoltan & Bokor, József & Hara, S.:
Title of journal:
IFAC-PapersOnLine, Volume 51, Issue 24
DOI:

https://doi.org/10.1016/j.ifacol.2018.09.635