Publications

Investigation of drilling-induced delamination considering mechanical supporting conditions in glass fibre reinforced polymer (GFRP) composites
Authors:
LUKÁCS Tamás, GEIER Norbert
Title of journal:
32nd International Conference on Mechanical Engineering
DOI:

https://ojs.emt.ro/oget/article/view/1571/1616

ISSN (or eSSN):
ISSN 2668-9685 ISSN-L 2068-1267
2024
Analysis of the relationship between fibre cutting angle and machining-induced burr in carbon fibre-reinforced polymer composites
Authors:
MAGYAR Gergely, GEIER Norbert
Title of journal:
32nd International Conference on Mechanical Engineering
DOI:

https://ojs.emt.ro/oget/article/view/1572/1617

ISSN (or eSSN):
ISSN 2668-9685 ISSN-L 2068-1267
2024
Experimental investigation of machining-induced interlayer burr in Al/CFRP sandwich structures
Authors:
MARKÓ Balázs, GEIER Norbert
Title of journal:
32nd International Conference on Mechanical Engineering
DOI:

https://ojs.emt.ro/oget/article/view/1575/1620

ISSN (or eSSN):
ISSN 2668-9685 ISSN-L 2068-1267
2024
Experimental analysis of machining-induced burrs in micro-drilled CFRP composite
Authors:
SEPRŐS Szilárd, GEIER Norbert
Title of journal:
32nd International Conference on Mechanical Engineering
DOI:

https://ojs.emt.ro/oget/article/view/1598/1641

ISSN (or eSSN):
ISSN 2668-9685 ISSN-L 2068-1267
2024
Machinability analysis of thermosetting epoxy resin through turning experiments
Authors:
GEIER Norbert, SEPRŐS Szilárd, POÓR Dániel István
Title of journal:
32nd International Conference on Mechanical Engineering
DOI:

https://ojs.emt.ro/oget/article/view/1556/1601

ISSN (or eSSN):
ISSN 2668-9685 ISSN-L 2068-1267
2024
Investigation of multi-axis edge trimming technology of carbon fibre-reinforced polymer (CFRP) composites in terms of machining-induced burr and surface roughness
Authors:
TIMA Tamás Sándor, GEIER Norbert
Title of journal:
32nd International Conference on Mechanical Engineering
DOI:

https://ojs.emt.ro/oget/article/view/1613/1658

ISSN (or eSSN):
ISSN 2668-9685 ISSN-L 2068-1267
2024
Impact assessment of fillers on the machinability of carbon fibre reinforced polymer composites
Authors:
Gergely Magyar, Dániel István Poór, Tamás Lukács, Péter Tamás-Bényei, Norbert Geier
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2023.06.143

ISSN (or eSSN):
online ISSN 2212-8271
2023
Novel Deep Neural Architecture Search Algorithm for Human Activity Recognition
Authors:
Hoang, A T ; Viharos, Zs J
Title of journal:
ERCIM NEWS
DOI:

https://ercim-news.ercim.eu/en132/special/novel-deep-neural-architecture...

2023
Digital twin assisted workpiece referencing for compensating the stock deviation of casted parts
Authors:
Tamás Cserteg, Gábor Erdős, Gergely Horváth, András Kovács
Title of journal:
Procedia CIRP, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP-ICME 2022)
DOI:

https://doi.org/10.1016/j.procir.2023.06.050

ISSN (or eSSN):
Online ISSN: 2212-8271
2023
Flexible Manufacturing Concept at Bosch: A low-cost implementation of an Industry 4.0 concept
Authors:
László Fükő, Ádám Szaller, Eduardo Colangelo, Gábor Nick, Botond Kádár
Title of journal:
19th IMEKO TC10 Conference “MACRO meets NANO in Measurement for Diagnostics, Optimization and Control”
DOI:

https://eprints.sztaki.hu/10620/

ISSN (or eSSN):
ISBN: 9789299009048
2023
Drilling-induced delamination measurement using a novel digital image processing algorithm
Authors:
Tamás Lukács, Csongor Pereszlai, Gergely Magyar, Norbert Geier
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2023.06.142

ISSN (or eSSN):
online ISSN 2212-8271
2023
The Actigraphy-Based Identification of Premorbid Latent Liability of Schizophrenia and Bipolar Disorder
Authors:
Ádám Nagy ,József Dombi ,Martin Patrik Fülep ,Emese Rudics ,Emőke Adrienn Hompoth ,Zoltán Szabó ,András Dér ,András Búzás ,Zsolt János Viharos ,Anh Tuan Hoang ,Bálint Maczák ,Gergely Vadai ,Zoltán Gingl ,Szandra László ,Vilmos Bilicki, stván Szendi
Title of journal:
Sensors
DOI:

https://doi.org/10.3390/s23020958

2023
Improving the Planning Quality in Practice with Artificial Intelligence
Authors:
Czarnetzki L ; Karnok D ; Breitschopf J ; Karner M ; Gashi M ; Mambrini T ; Laflamme C ; Gallina V
Title of journal:
19th IMEKO TC10 Conference “MACRO meets NANO in Measurement for Diagnostics, Optimization and Control” Delft, The Netherlands, September 21–22, 2023
DOI:

https://eprints.sztaki.hu/10594/1/Czarnetzki_33_34415113_ny.pdf

2023
Distributed real-time production control for resilient manufacturing systems
Authors:
Eckart Uhlmann, Julian Polte, Christopher Mühlich
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2023.09.162

2023
Concept of a Modular Embedded Computing Platform for Automation Extension Experiments
Authors:
Zsolt Kemény, Richárd József Beregi, Kristóf Abai
Title of journal:
Proceedings of the 13th Conference on Learning Factories (CLF 2023), published in SSRN
DOI:

https://dx.doi.org/10.2139/ssrn.4469200

2023
Learning Factories towards Industry 5.0: Evolutionary or Revolutionary?
Authors:
Gyulai, T ; Wolf, P ; Kása, F ; Viharos, Zs J
Title of journal:
19th IMEKO TC10 Conference “MACRO meets NANO in Measurement for Diagnostics, Optimization and Control” Delft, The Netherlands, September 21–22, 2023
DOI:

https://www.imeko.org/index.php/proceedings/9141-learning-factories-towa...

2023
Prediction of Quality in Thermographic Spray Spot Applications with Machine Learning Algorithms
Authors:
Eckart Uhlmann, Julian Polte, Nikolaos-Stefanos Koutrakis, Lasse Pyka, Müslüm Ider, Georg Thomas, Christian Rupprecht
Title of journal:
56th CIRP International Conference on Manufacturing Systems 2023
DOI:

https://doi.org/10.1016/j.procir.2023.09.151

2023
Concept of a modular hardware platform for automation extension experiments
Authors:
Zsolt Kemény, Richárd Beregi, Kristóf Abai
Title of journal:
13th Conference on Learning Factories, CLF2023 (proceedings volume to be published on SSRN)
DOI:

https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4469200

2023
Transforming Experimental Cobot Cell to Industrial Realization – an Ethical AI Approach
Authors:
Mezgár I., Váncza J, Paniti I, Tóth J.
Title of journal:
IFAC World Congress 2023, (IFAC WC 2023)
DOI:

https://doi.org/10.1016/j.ifacol.2023.10.347

2023
Digital Twin training concept based on miniature demonstration factories
Authors:
Nikolaus Kremslehner, Thomas Sobottka, János Nacsa, Richárd Beregi, Sebastian Schlund
Title of journal:
CLF 2023
DOI:

http://dx.doi.org/10.2139/ssrn.4458212

2023
Upskilling SME Workforce by Learning Factories
Authors:
Gyulai, Tamás ; Viharos, Zsolt János; Kása, Ferenc ; Wolf, Peter
Title of journal:
13th Conference on Learning Factories (CLF 2023)
DOI:

https://www.imeko.org/index.php/proceedings/9141-learning-factories-towa...

2023
Poisson Equations, Lipschitz Continuity and Controlled Queues
Authors:
Carè A., Csáji B. Cs., Gerencsér B., Gerencsér L., Rásonyi M.
Title of journal:
IEEE Transactions on Automatic Control
DOI:

https://doi.org/10.48550/arXiv.1906.09464

2023
Dynamic Production Line Re-balancing by Alternative Plans for Compensating Equipment Failures
Authors:
Tsutsumi, D.; Bergmann, J.; Dobrovoczki, P.; Hayashi, N,; Kovács, A.; Szádoczki, Zs.; Szaller, Á.; Umeda, S.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2023.09.080

ISSN (or eSSN):
ISSN: 2212-8271
2023
Vibration Based Cutting Tool Path Differentiation by Feature Selection
Authors:
Móricz, L ; Viharos, Zs J
Title of journal:
18th IMEKO TC10 Conference “Measurement for Diagnostics, Optimisation and Control to Support Sustainability and Resilience”
DOI:

10.21014/tc10-2022.025

2022
Impact of Customer Order Change Dimensions on Order Management
Authors:
Christian Fries, Ádám Szaller, Thomas Bauernhansl, Günther Schuh
Title of journal:
IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)
DOI:

10.1109/IEEM55944.2022.9989974

ISSN (or eSSN):
Electronic ISBN:978-1-6654-8687-3
2022
Recent Developments and Future Challenges in Incremental Sheet Forming of Aluminium and Aluminium Alloy Sheets
Authors:
Trzepieciński, T; Najm, S M ; Oleksik, V ; Vasilca, D ; Paniti, I ; Szpunar, M
Title of journal:
Metals
DOI:

https://www.mdpi.com/2075-4701/12/1/124/htm

ISSN (or eSSN):
2075-4701
2022
Simulation-based Learning of the Peg-in-Hole Process using Robot-Skills10.1109/IROS47612.2022.9982212
Authors:
Arik Lämmle; Philipp Tenbrock; Balázs Bálint; Frank Nägele; Werner Kraus; József Váncza; Marco F. Huber
Title of journal:
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2022
DOI:

10.1109/IROS47612.2022.9982212

2022
An Online Toolkit for Applications Featuring Collaborative Robots Across Different Domains
Authors:
Saenz, José; Bessler-Etten, Jule; Valori, Marcello; Prange-Lasonder, Gerdienke B.; Fassi, Irene; Bidard, Catherine; Lassen, Aske Bach; Paniti, Imre; Toth, Andras; Stuke, Tobias; Wrede, Sebastian; Nielsen, Kurt
Title of journal:
IEEE Transactions on Human-Machine Systems
DOI:

https://doi.org/10.1109/THMS.2022.3213416

ISSN (or eSSN):
EISSN 2168-2305
2022
Extension of the CCMS 2.0 maturity model towards artificial intelligence
Authors:
Gábor Nick, Andrea Kő, Ádám Szaller, Klaudia Éva Zeleny, Botond Kádár, Tibor Kovács
Title of journal:
IFAC PapersOnline
DOI:

https://doi.org/10.1016/j.ifacol.2022.09.403

ISSN (or eSSN):
ISSN: 2405-8963
2022
Recent Developments and Future Challenges in Incremental Sheet Forming of Aluminium and Aluminium Alloy Sheets
Authors:
Trzepieciński T, Najm SM, Oleksik V, Vasilca D, Paniti I, Szpunar M.
Title of journal:
Metals
DOI:

https://doi.org/10.3390/met12010124

ISSN (or eSSN):
EISSN 2075-4701
2022
Investigation of ductile/brittle chip formation zone in the context of manufactured geometry with different CAM paths strategies
Authors:
László Móricz, Zsolt Viharos János
Title of journal:
10th IFAC Conference on Manufacturing Modelling, Management and Control
DOI:

https://doi.org/10.1016/j.ifacol.2022.10.051

2022
ProSeqqo: A generic solver for process planning and sequencing in industrial robotics
Authors:
Zahorán, L.; Kovács, A.
Title of journal:
Robotics and Computer-Integrated Manufacturing
DOI:

https://doi.org/10.1016/j.rcim.2022.102387

ISSN (or eSSN):
Print ISSN: 0736-5845 Online ISSN: 1879-2537
2022
Drilling of recycled carbon fibre–reinforced polymer (rCFRP) composites: analysis of burrs and microstructure
Authors:
Norbert Geier, Dániel István Poór, Csongor Pereszlai, Péter Tamás‑Bényei
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-022-08847-4

ISSN (or eSSN):
ISSN 02683768, 14333015
2022
Reducing remanufacturing uncertainties with the digital product passport
Authors:
Barna Gal, Adam Szaller, Daniel Bachlechner, Elisabeth Zudor, Wilfried Sihn
Title of journal:
18th Global Conference on Sustainable Manufacturing
DOI:

https://link.springer.com/chapter/10.1007/978-3-031-28839-5_7

ISSN (or eSSN):
978-3-031-28839-5
2022
Economic Aspects of a Resource Sharing Manufacturing Network under Turbulences
Authors:
Ádám Szaller, Christian Fries, Gábor Nick, Botond Kádár
Title of journal:
Proceedings of the 18th European Conference on Management Leadership and Governance
DOI:

https://doi.org/10.34190/ecmlg.18.1.885

ISSN (or eSSN):
Digital ISSN: 2048-903X
2022
Defining the Intelligent Manufacturing Enterprose
Authors:
Günther Schuh, Thomas Scheuer, Riley Colleen Padovano
Title of journal:
Journal of Production Systems and Logistics
DOI:

https://doi.org/10.15488/11731

ISSN (or eSSN):
2702-2587
2022
A robust digital image processing method for measuring the planar burr length at milling
Authors:
György Póka, Barnabás Zoltán Balázs
Title of journal:
Journal of Manufacturing Processes
DOI:

https://doi.org/10.1016/j.jmapro.2022.06.037

ISSN (or eSSN):
ISSN 15266125
2022
Vibration Based Characterization of Tool Wearing in Micro-milling of Ceramics During Waveform Toolpath
Authors:
László Móricz, Zsolt János Viharos
Title of journal:
Gradus
DOI:

https://doi.org/10.47833/2022.1.ENG.003

ISSN (or eSSN):
ISSN 2064-8014
2022
Automated vehicle fleet management in relentless production – a case study in semi-conductor manufacturing
Authors:
Bergmann, J.; Váncza, J,; Kovács, A.
Title of journal:
32nd EURO Conference, Association of European Operational Research Societies, Finnish Operations Research Society
DOI:

https://www.euro-online.org/conf/admin/tmp/program-euro32.pdf

ISSN (or eSSN):
ISBN 978-951-95254-1-9
2022
Machine Learning Approach for Degradation Path Prediction Using Different Models and Architectures of Artificial Neural Networks
Authors:
Basheer Shaheen, István Németh
Title of journal:
Periodica Polytechnica Mechanical Engineering
DOI:

https://doi.org/10.3311/PPme.20145

ISSN (or eSSN):
Online ISSN : 1587-379X
2022
Flexible Automatisierung mit Virtuellen Agenten
Authors:
E. Uhlmann, J. Polte, C. Mühlich, K. Lindow, J. Harrendorf
Title of journal:
wt Werkstattstechnik online
DOI:

http://doi.org/10.37544/1436-4980-2022-07-08-30

ISSN (or eSSN):
1436-4980
2022
Factory of the Year Prize – A Benchmarking
Authors:
Viola Gallina1, Zsolt János Viharos2,6, Gabor Nick3,2, Maik Frye4, Andreas Kluth5, Robert H. Schmitt
Title of journal:
18th IMEKO TC10 Conference “Measurement for Diagnostics, Optimisation and Control to Support Sustainability and Resilience”
DOI:

10.21014/tc10-2022.005

2022
Autonomous Vehicle Drift With a Soft Actor-critic Reinforcement Learning Agent
Authors:
Tóth, Sz. H.; Bárdos, Á.; Viharos Zs. J.
Title of journal:
IEEE 20th Jubilee World Symposium on Applied Machine Intelligence and Informatics
DOI:

10.1109/SAMI54271.2022.9780803

2022
Integration of Maintenance Management System Functions with Industry 4.0 Technologies and Features—A Review
Authors:
Basheer Shaheen, István Németh
Title of journal:
Processes
DOI:

https://doi.org/10.3390/pr10112173

ISSN (or eSSN):
ISSN: 2227-9717
2022
Study 2021: Impact of COVID-19 on production
Authors:
Claudio Geisert, Jeannette Baumgarten
DOI:

10.24406/ipk-n-648462

2022
From ethics to standards – A path via responsible AI to cyber-physical production systems
Authors:
Mezgár, I., Váncza J.
Title of journal:
Annual Reviews in Control
DOI:

https://doi.org/10.1016/j.arcontrol.2022.04.002

ISSN (or eSSN):
Online ISSN: 1872-9088 Print ISSN: 1367-5788
2022
Investigation and machine learning-based prediction of parametric effects of single point incremental forming on pillow effect and wall profile of AlMn1Mg1 aluminum alloy sheets
Authors:
Sherwan Mohammed Najm and Imre Paniti
Title of journal:
Journal of Intelligent Manufacturing
DOI:

https://doi.org/10.1007/s10845-022-02026-8

ISSN (or eSSN):
EISSN 1572-8145
2022
Tool failure recognition using inconsistent data
Authors:
Júlia Bergmann, Klaudia Éva Zeleny, József Váncza, Andrea Kő
Title of journal:
Procedia CIRP CIRP CMS 2022
DOI:

https://doi.org/10.1016/j.procir.2022.05.132

2022
Expert System for the Machine Learning Pipeline in Manufacturing
Authors:
M. Frye, J. Krauß, R. H. Schmitt
Title of journal:
17th IFAC Symposium on Information Control Problems in Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2405896321007175

ISSN (or eSSN):
ISSN: 2405-8963
2021
Artificial neural network for modeling and investigating the effects of forming tool characteristics on the accuracy and formability of thin aluminum alloy blanks when using SPIF
Authors:
Sherwan Mohammed Najm, Imre Paniti
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://link.springer.com/article/10.1007/s00170-021-06712-4

ISSN (or eSSN):
0268-3768
2021
Benchmarking of Data Preprocessing Methods for Machine Learning Applications in Production
Authors:
Maik Frye, Johannes Mohren, Robert H. Schmitt
Title of journal:
Procedia CIRP CIRP CMS
DOI:

https://www.sciencedirect.com/science/article/pii/S2212827121009070

2021
A two-step digitalization level assessment approach for manufacturing companies
Authors:
Günther Schuh, Thomas Scheuer, Gábor Nick, Ádám Szaller, Tamás Várgedő
Title of journal:
Procedia Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2351978921001384

ISSN (or eSSN):
2351-9789 ISSN
2021
Integrating maintenance strategies in autonomous production control using a cost-based model
Authors:
Glawar, R.; Ansari, F.; Viharos, Z. J.; Matyas, K.; Sihn, W.
Title of journal:
ACTA IMEKO
DOI:

https://acta.imeko.org/index.php/acta-imeko/article/view/IMEKO-ACTA-10%2...

2021
Enabling distance learning and remote collaboration in layout and process planning
Authors:
Zsolt Kemény, Richárd Beregi, Mátyás Hajós, János Csempesz, János Nacsa
Title of journal:
SSRN, Proceedings of the Conference on Learning Factories (CLF) 2021
DOI:

https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3858609

ISSN (or eSSN):
1556-5068 ISSN
2021
Microsecond measurement resolution for process cycle diagnostics of micro-EDM milling
Authors:
Viharos, Z. J.; Farkas, B. Zs.
Title of journal:
Measurement: Sensors
DOI:

https://doi.org/10.1016/j.measen.2021.100123

2021
Emerging Trends in Single Point Incremental Sheet Forming of Lightweight Metals
Authors:
Trzepieciński, T.; Oleksik, V.; Pepelnjak, T.; Najm, S.M.; Paniti, I.; Maji, K.
Title of journal:
Metals
DOI:

https://www.mdpi.com/2075-4701/11/8/1188/htm

ISSN (or eSSN):
2075-4701
2021
Drilling fibre reinforced polymer composites (CFRP and GFRP): An analysis of the cutting force of the tilted helical milling process
Authors:
Csongor Pereszlai, Norbert Geier, Dániel István Poór, Barnabás Zoltán Balázs, György Póka
Title of journal:
Composite Structures
DOI:

https://www.sciencedirect.com/science/article/pii/S0263822321001070?via%...

ISSN (or eSSN):
0263-8223 ISSN
2021
Vibration based characterization of tool wearing in micro-milling of ceramics
Authors:
Móricz, L.; Viharos, Z. J..
Title of journal:
Measurement: Sensors
DOI:

https://www.sciencedirect.com/science/article/pii/S2665917421001379

2021
Effect of lead time prediction accuracy in trust-based resource sharing
Authors:
Ádám Szaller, Botond Kádár
Title of journal:
IFAC PapersOnline
DOI:

https://www.sciencedirect.com/science/article/pii/S2405896321008934?via%...

ISSN (or eSSN):
ISSN: 2405-8963
2021
Parametric Effects of Single Point Incremental Forming on Hardness of AA1100 Aluminium Alloy Sheets
Authors:
Najm, S.M.; Paniti, I.; Trzepieciński, T.; Nama, S.A.; Viharos, Z.J.; Jacso, A.
Title of journal:
Materials
DOI:

https://www.mdpi.com/1996-1944/14/23/7263/htm

ISSN (or eSSN):
1996-1944
2021
Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations
Authors:
Norbert Geier, Jinyang Xu, Csongor Pereszlai, Dániel István Poór, J. Paulo Davim
Title of journal:
Procedia Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2351978921001815

ISSN (or eSSN):
2351-9789 ISSN
2021
Vibration-based tool life monitoring for ceramics micro-cutting under various toolpath strategies
Authors:
Viharos, Z. J.; Móricz, L.; Büki, M. I.
Title of journal:
ACTA IMEKO
DOI:

https://www.sciencedirect.com/science/article/pii/S2665917421001379

2021
Derivation of Constituent Problem Characteristics for the Application of Machine Learning Systems
Authors:
Günther Schuh, Paul Scholz, Timon Burger
Title of journal:
2021 4th International Conference on Information and Computer Technologies (ICICT)
DOI:

DOI 10.1109/ICICT52872.2021.00014

2021
Industry 4.0 readiness in manufacturing: Company Compass 2.0, a renewed framework and solution for Industry 4.0 maturity assessment
Authors:
Gábor Nick, Botond Kádár
Title of journal:
Procedia Manufacturing
DOI:

https://www.sciencedirect.com/science/article/pii/S2351978921001402

ISSN (or eSSN):
2351-9789 ISSN
2021
Adaptive, Hybrid Feature Selection (AHFS)
Authors:
Zsolt János Viharos, Krisztián Balázs Kis, Ádám Fodor, Máté István Büki
Title of journal:
Pattern Recognition
DOI:

https://www.sciencedirect.com/science/article/pii/S0031320321001199

ISSN (or eSSN):
ISSN: 0031-3203
2021
Human-robot collision predictor for flexible assembly
Authors:
Imre Paniti, János Nacsa, Péter Kovács, Dávid Szur
Title of journal:
ACTA IMEKO
DOI:

https://acta.imeko.org/index.php/acta-imeko/article/view/IMEKO-ACTA-10%2...

ISSN (or eSSN):
ISSN 2221-870X
2021
Complementary Manipulator Tool Development for Safe Cobot-Assisted Hydroponics
Authors:
Imre Paniti, János Nacsa, Dávid Szűr, Sándor Rácz, József Tóth
DOI:

https://hjic.mk.uni-pannon.hu/index.php/hjic/article/view/1150

ISSN (or eSSN):
2450-5102
2021
Predict the Effects of Forming Tool Characteristics on Surface Roughness of Aluminum Foil Components Formed by SPIF Using ANN and SVR
Authors:
Sherwan Mohammed Najm, Imre Paniti
Title of journal:
International Journal of Precision Engineering and Manufacturing
DOI:

https://link.springer.com/article/10.1007/s12541-020-00434-5

ISSN (or eSSN):
2234-7593
2021
A critical review of the drilling of CFRP composites: Burr formation, characterisation and challenges
Authors:
Dániel István Poór, Norbert Geier, Csongor Pereszlai, Jinyang Xu
Title of journal:
Composites Part B: Engineering
DOI:

https://www.sciencedirect.com/science/article/pii/S1359836821005357?via%...

2021
Platform and direct exchange-based mechanisms for resource sharing in distributed manufacturing: a comparison
Authors:
Ádám Szaller, Botond Kádár
Title of journal:
CIRP Annals Manufacturing Technology
DOI:

https://www.sciencedirect.com/science/article/pii/S000785062100072X

ISSN (or eSSN):
ISSN: 0007-8506
2021
Reinforcement Learning for Statistical Process Control in Manufacturing
Authors:
Viharos Z. J.; Jakab, R. B.
Title of journal:
Measurement
DOI:

https://www.sciencedirect.com/science/article/pii/S0263224121005881

2021
Univerzális mechanikus megfogó vizsgálata optikai elven működő erőmérő használatával
Authors:
Nagy, A. T.; Paniti, I.
Title of journal:
Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Proceedings of the 17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
Authors:
Viharos, Zs. J.; Ciani, L.; Bilski, P.; Jakovcic, M.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Adaptive Scheduling through Machine Learning-based Process Parameter Prediction
Authors:
Frye, M.; Gyulai, D.; Bergmann, J.; Schmitt, R.
Title of journal:
MM Journal
DOI:

10.17973/MMSJ.2019_11_2019051.

2020
Bio-inspired control of automated stem cell production
Authors:
Egri, P.; Csáji, B. Cs.; Kis, K. B.; Monostori, L.; Váncza, J.; Ochs, J.; Jung, S.; König, N.; Schmitt, R.; Brecher, C.; Pieske, S.; Wein, S.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.05.105.

2020
Comprehensive Comparison of MTM and BasicMOST, as the Most Widely Applied PMTS Analysis Methods
Authors:
Viharos, Zs. J.; Bán, B.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
A mutualistic framework for sustainable capacity sharing in manufacturing
Authors:
Szaller, Á.; Pedone, G.; Egri, P.; Szalóki, Á.; Nick, G.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.04.024

2020
Recent advances in learning content and infrastructure development for layout and process planning courses at the SZTAKI learning factories
Authors:
Kemény, Zs.; Beregi, R.; Tipary, B.; Abai, K.; Nacsa, J.
Title of journal:
10th Conference on Learning Factories
DOI:

https://doi.org/10.1016/j.promfg.2020.04.024

2020
Structured Data Preparation Pipeline for Machine Learning-Applications in Production
Authors:
Frye, M.; Schmitt, R. H.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Optimizing the numerical algorithm in Fast Constant Engagement Offsetting Method for generating 2.5D milling tool paths
Authors:
Jacsó, Á.; Szalay, T.
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-020-05452-1

2020
A cost-based model for integrating maintenance strategies in autonomous production control
Authors:
Glawar, R.; Ansari, F.; Viharos, Zs. J.; Matyas, K.; Sihn, W.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Moduláris szerelési paletta oktatási célú kollaboratív robotos munkaállomáshoz
Authors:
Szűr, D.; Nacsa, J.; Beregi, R.; Kemény, Z.
Title of journal:
XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Development of the Supply Chain Management 2040 – Opportunities and challenges
Authors:
Schiffer, M.; Dörr, D. M.
Title of journal:
Opportunities and challenges. 1st Conference on Production Systems and Logistics
DOI:

https://doi.org/10.15488/9644

2020
Intelligent production of the future – first results of a survey
Authors:
Nick, G.; Szaller, Á.; Viharos, Zs. J.; Várgedő, T.; Bányai, D.; Fries, C.; Fechter, M.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
VR and Depth Camera based Human-Robot Collision Predictor System with 3-Finger Gripper Assisted Assembly Device
Authors:
Imre Paniti, János Nacsa, Péter Kovács, Dávid Szűr
Title of journal:
23rd International Symposium on Measurement and Control in Robotics
DOI:

https://eprints.sztaki.hu/10008/

ISSN (or eSSN):
978-1-6654-0479-2
2020
Kodácsy, J.: Surface flatness and roughness evolution after magnetic assisted ball burnishing of magnetizable and non-magnetizable materials
Authors:
Kovács, Zs. F.; Viharos, Zs. J.
Title of journal:
Measurement
DOI:

https://doi.org/10.1016/j.measurement.2020.107750

2020
A stochastic approach to calculate assembly cycle times based on spatial shop-floor data stream
Authors:
Bergmann, J.; Gyulai, D.; Morassi, D.; Váncza, J.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.04.024

2020
Condition Monitoring Concept for Industrial Robots
Authors:
Uhlmann, E.; Polte, J.; Geisert, C.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Off-line geometrical and microscopic & on-line vibration based cutting tool wear analysis for micro-milling of ceramics
Authors:
Móricz, L.; Viharos, Z. J., Németh, A.; Szépligeti, A.; Büki, M.
Title of journal:
Measurement
DOI:

https://doi.org/10.1016/j.measurement.2020.108025

2020
Identification and characterization of challenges in the production environment of the future for the application of data-based technologie
Authors:
Schuh, G.; Scholz, P.; Nadicksbernd, M.
Title of journal:
IEEE Information Technology and Management Science Conference 2020
DOI:

10.1109/ITMS51158.2020.9259318

2020
Joint optimization of product tolerance design, process plan, and production plan in high-precision multi-product assembly
Authors:
Tsutsumi, D.; Gyulai, D.; Kovács, A.; Tipary, B.; Ueno, Y.; Nonaka, Y.; Fujita, K.
Title of journal:
Journal of Manufacturing Systems
DOI:

https://doi.org/10.1016/j.jmsy.2020.01.004

2020
Böngésző alapú felhasználói felület Panda robothoz
Authors:
Bocsi, K.; Nacsa, J.
Title of journal:
XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Contribution to the industry-specific identification and selection of a business model in machinery and equipment industry
Authors:
Bauernhansl, T.; Dörr, D. M.
Title of journal:
1st Conference on Production Systems and Logistics
DOI:

https://doi.org/10.15488/9643

2020
Beyond the profit motive: Environmentally conscious (re)design of supply chain structures
Authors:
Monostori, J.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2020.03.033

2020
Reinforcement Learning for Statistical Process Control in Manufacturing
Authors:
Viharos, Zs. J.; Jakab, R. B.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Study on Effecting Parameters of Flat and Hemispherical end Tools in SPIF of Aluminium Foils
Authors:
Najm, S. M.; Paniti, I
Title of journal:
Journal Tehnički vjesnik – Technical Gazette (TV-TG)
DOI:

https://hrcak.srce.hr/248218

ISSN (or eSSN):
ISSN 1330-3651 (Print), ISSN 1848-6339 (Online)
2020
Experimental and Numerical Investigation of Single Point Incremental Forming of Aluminium Alloy Foils
Authors:
Paniti, I., Viharos, Z.J., Harangozó, D. and Najm, S.M.
Title of journal:
ACTA IMEKO
DOI:

http://dx.doi.org/10.21014/acta_imeko.v9i1.750

2020
CCMS Model – a Novel Approach to Digitalization Level Assessment for Manufacturing Companies
Authors:
Nick, G.; Szaller, À.; Várgedő, T.
Title of journal:
European conference on management, leadership and governance
ISSN (or eSSN):
ISSN 2048-9021
2020
Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs
Authors:
Pereszlai, Cs.; Geier, N.
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-019-04842-4

2020
Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites
Authors:
Geier, N.
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://doi.org/10.1007/s00170-020-06163-3

2020
Identification and analysis of the technology potential of machine learning systems in the production of the future
Authors:
Schuh, G.; Scholz, P.; Leich, T.; May, R.
Title of journal:
IEEE Information Technology and Management Science Conference 2020
DOI:

10.1109/ITMS51158.2020.9259303

2020
A review on micro-milling: recent advances and future trends
Authors:
Barnabás Zoltán Balázs, Norbert Geier, Márton Takács, J. Paulo Davim
Title of journal:
The International Journal of Advanced Manufacturing Technology
DOI:

https://link.springer.com/article/10.1007/s00170-020-06445-w

2020
A constraint model for assembly planning
Authors:
Kardos, Cs.; Kovács, A.; Váncza, J.
Title of journal:
Journal of Manufacturing Systems
DOI:

https://doi.org/10.1016/j.jmsy.2019.11.007

2020
Robotos pakolási feladat megoldása környezetérzékelés segítségével
Authors:
Hajós, M.; Horváth, D.
Title of journal:
XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020
ISSN (or eSSN):
ISSN 2668-9685
2020
Lubricants and Affecting Parameters on Hardness in SPIF of AA1100 Aluminum
Authors:
Paniti, I.; Najm, S. M.; Viharos, Zs. J.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Adaptive network analytics for managing complex shop-floor logistics
Authors:
Gyulai, D,; Bergmann, J.; Váncza, J.
Title of journal:
CIRP Annals-Manufacturing Technology
DOI:

https://doi.org/10.1016/j.cirp.2020.04.002

2020
Allocating raw materials to competing projects
Authors:
Péter, E.; Tamás, K.
Title of journal:
Computers & Industrial Engineering
DOI:

https://doi.org/10.1016/j.cie.2020.106386

2020
Case study on technological applications for production planning and control in the context of Industry 4.0
Authors:
Schuh, G.; Patrick, S.
Title of journal:
1st Conference on Production Systems and Logistics
DOI:

https://doi.org/10.15488/9683

2020
Effect of CAM Path Strategies on Tool Life in Ceramics Micro-Cutting
Authors:
Móricz, L.; Viharos, Zs. J.; Büki, M.
Title of journal:
17th IMEKO TC 10 and EUROLAB Virtual Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030”
ISSN (or eSSN):
ISBN 978-92-990084-6-1
2020
Lessons Learned from the COVID-19 Pandemic and Their Possible Consequences on Manufacturing
Authors:
Monostori, L.; Váncza, J.
Title of journal:
Smart and Sustainable Manufacturing Systems 4
DOI:

https://doi.org/10.1520/SSMS20200063

2020
Physical Internet – a Novel Application Area for Industry 4.0
Authors:
Puskas, Eszter & Bohács, Gábor
Title of journal:
International Journal of Engineering and Management Sciences
DOI:

10.21791/IJEMS.2019.1.19.

2019 (published)
The effect of radial rake angle on chip thickness in the case of face milling. Proceedings of the Institution of Mechanical Engineers
Authors:
György Póka, István Németh
Title of journal:
Part B: Journal of Engineering Manufacture
DOI:

https://doi.org/10.1177/0954405419849245

2019 (published)
The effects of machining strategies of magnetic assisted roller burnishing on the resulted surface structure
Authors:
Kovács, Zsolt Ferenc and Viharos, Zsolt János and Kodácsy, János
2019 (published)
Heterogeneous String Stability of Unidirectionally Interconnected MIMO LTI Systems.
Authors:
Rödönyi, Gábor
2019 (published)
Smart Cyber-Physical System applications in production and logistics: special issue editorial
Authors:
Elisabeth Ilie-Zudor, Davy Preuveneers, Anikó Ekárt & Eckhard Hohwieler
Title of journal:
International Journal of Computer Integrated Manufacturing
DOI:

https://doi.org/10.1080/0951192X.2019.1616152

2019 (published)
The fast constant engagement offsetting method for generating milling tool paths.
Authors:
Adam Jacso, Gyula Matyasi, Tibor Szalay
Title of journal:
The International Journal of Advanced Manufacturing Technology.
DOI:

https://doi.org/10.1007/s00170-019-03834-8

2019 (published)
Bilevel programming approach to demand response management with day-ahead tariff
Authors:
Kovács, A.
Title of journal:
Journal of Modern Power System and Clean Energy
DOI:

https://doi.org/10.1007/s40565-019-0569-7

2019
Simulation Framework for Evaluating Production Networks
Authors:
Egri, P.; Váncza, J.; Szaller, Á.; Monostori, J.
Title of journal:
Middle-European Conference on Applied Theoretical Computer Science
ISSN (or eSSN):
ISSN 2630-371X
2019
Kompetenzanforderungen im Rahmen von Digitalisierung und Industrie 4.0 (SP48)
Authors:
Hecklau, F.; Orth, R.; Kidschun, F.; Tominaj, S.
Title of journal:
State-of-the-Art and Outlook Proceedings of the 10th Knowledge Management in Digital Work Environments
DOI:

doi.org/10.34678/opus4-2412

2019
The examination of the effect of variable cutting speeds on the surface and edge qualities of milled granite materials
Authors:
Gyurika, I. G.; Szalay, T.
Title of journal:
Advance in Mechanical Engineering
DOI:

https://doi.org/10.1177/1687814019836319

2019
A hybrid simulation tool to improve the energy efficiency in production environment
Authors:
Zhou, B.; Frye, M.; Sander, C.; Schmitt R. H.
Title of journal:
IEEE International Conference on Systems, Man and Cybernetics (SMC)
DOI:

10.1109/SMC.2019.8914514

2019
Pilot factories in the frame of centre of excellence in production informatics and control
Authors:
Czampa, M.; Szalay, T.; Nacsa J.; Nausch, M.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
Episodes of Robotics and Manufacturing Automation Achievements from the Past Decades and Vision for the Next Decade
Authors:
Haidegger, G.; Paniti, I.
Title of journal:
Acta Polytechnica Hungarica
DOI:

https://doi.org/10.12700/APH.16.10.2019.10.8

2019
Towards a connected factory: Shop-floor data analytics in cyber-physical environments
Authors:
Gyulai, D.; Bergmann, J.; Gallina, V.; Gaal, A.
Title of journal:
7th CIRP Global Web Conference, Towards shifted production value stream patterns inference of data, models and technology
DOI:

10.1016/j.procir.2020.01.016

2019
Product quality and cutting tool analysis for micro-milling of ceramics
Authors:
L Móricz, Zs. J. Viharos, A. Németh, A. Széplige
2019
Layout configuration, maintenance planning and simulation of AGV based robotic assembly systems
Authors:
Németh, I.; Püspöki, J.; B. Viharos, A.; Zsóka, L.; Pirka, B.
Title of journal:
9th IFAC Conference on Manufacturing Modelling, Management and Control
DOI:

10.1016/j.ifacol.2019.11.433

2019
Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review
Authors:
Norbert Geier, J Paulo Davim, Tibor Szalay
DOI:

10.1016/j.compositesa.2019.105552

2019
Cycloid Approximation with Circle for the Calculation of Exit Angle
Authors:
Póka, Gy.; Németh I.
Title of journal:
Tehnički Vjesnik
DOI:

10.17559/tv-20170712162549

2019
Issues in Manufacturing Automation & Robotics within the Past 4 Decades and Vision for the Next
Authors:
Haidegger, G. and Paniti, I.
ISSN (or eSSN):
ISBN 9781728112138
2019
Adaptive scheduling through machine learning-based process parameter prediction
Authors:
Frye, M.; Gyulai, D.; Bergmann, J.; H. Schmitt, R.
Title of journal:
Conference on High Speed Machining
ISSN (or eSSN):
ISSN 1805-0476
2019
Influence of fixturing setup on quality of edge trimmed UD-CFRP
Authors:
Pereszlai, Cs.; Geier, N.; Poór, D.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
Magnetic Assisted Ball Burnishing of Magnetizable and Non-Magnetizable Materials
Authors:
Zsolt Ferenc Kovács, Zsolt János Viharos, János Kodácsy, Roland Sándor
ISSN (or eSSN):
ISBN 978-92-990084-1-6
2019
Technological Trends in Context of Industry 4.0 and Their Industrial Applications
Authors:
Schuh, G.; Scholz, P.; Patzwald, M.
Title of journal:
60th International Scientific Conference on Information Technology and Management Science of Riga Technical University (ITMS)
DOI:

10.1109/ITMS47855.2019.8940720

2019
A pilot experimental research on drilling of cfrp under tensile stress
Authors:
Poór, D.; Geier, N.; Pereszlai, Cs.; Forintos, N.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
Conceptual Design of an Integrative Autonomous Production Control Model in association with a Prescriptive Maintenance Model (PriMa)
Authors:
"Robert Glawar, Fazel Ansari, Csaba Kardos, Kurt Matyas, Wilfried Sihn"
Title of journal:
26th CIRP Life Cycle Engineering (LCE) Conference
2019
Quality Improvement of Milling Processes Using Machine Learning-Algorithms
Authors:
Maik Frye, Robert H. Schmitt
ISSN (or eSSN):
ISBN 978-92-990084-1-6
2019
Monitoring of orbital drilling process in CFRP based on digital image processing of characteristics of uncut fibres
Authors:
Geier, N.; Póka, Gy.; Pereszlai, Cs.
Title of journal:
Procedia CIRP
DOI:

https://doi.org/10.1016/j.procir.2019.09.011

2019
Passivity analysis of rational LPV systems using Finslers lemma
Authors:
Polcz, P.; Kulcsár, B.; Péni, T.; Szederkényi, G.
Title of journal:
IEEE CDC 2019: Annual Conference on Decision and Control
DOI:

https://doi.org/10.1109/CDC40024.2019.9029877

2019
Usability investigation of portable coordinate measuring equipment
Authors:
Gábriel, M.; Czampa, M.; Szalay, T.
Title of journal:
Proceedings of International Conference on Innovative Technologies
ISSN (or eSSN):
ISSN 0184-9069
2019
"PriMa: a prescriptive maintenance model for cyber-physical production systems"
Authors:
Fatel Ansari, Robert Glawar, Tanja Nemeth
Title of journal:
International Journal of Computer Integrated Manufacturing
2019
Determination of the working gap and optimal machining parameters for magnetic assisted ball burnishing
Authors:
Kovacs, Zsolt; Kodácsy, János; Viharos, Zsolt
Title of journal:
Measurement, Volume 118
2018 March (published)
PRODUCTION LOG DATA ANALYSIS FOR REJECT RATE PREDICTION AND WORKLOAD ESTIMATION
Authors:
Pfeiffer, András & Gyulai, Dávid & Szaller, Ádám & Monostori, Laszlo
DOI:

10.1109/WSC.2018.8632482

2018 (published)
Evaluation, ranking and positioning of measurement methods for pellet production
Authors:
Konrád, Krisztina; Viharos, Zsolt; Németh, G.
ISSN (or eSSN):
ISSN 0263-2241
2018 (published)
Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation
Authors:
Móricz, L. and Viharos, Zsolt János and Németh, A. and Szépligeti, A.
Title of journal:
IOP Conference Series: Journal of Physics: Conference Series, 1065
DOI:

10.1088/1742-6596/1065/10/102003

2018 (published)
Generating Human Work Instructions from Assembly Plans
Authors:
Kardos, Cs.; Kovács, A.; Pataki, B.E.; Váncza, J.
2018 (published)
A Novel Big-data-based Estimation Method of Side-slip Angles for Autonomous Road Vehicles
Authors:
Fényes, Dániel & Nemeth, Balazs & Gáspár, Péter
DOI:

10.5220/0006849504200426

ISSN (or eSSN):
ISBN: 978-989-758-321-6
2018 (published)
Reconfiguration control of in-wheel electric vehicle based on battery state of charge
Authors:
A. Mihály and P. Gáspár
DOI:

10.23919/ECC.2018.8550283

2018 (published)
Annihilator design for linear parameter varying systems
Authors:
Szabo, Zoltan & Peni, Tamas & Bokor, József
Title of journal:
IFAC-PapersOnLine. Volume 51, Issue 24.
DOI:

https://doi.org/10.1016/j.ifacol.2018.09.701

2018 (published)
Side-slip Angle Estimation of Autonomous Road Vehicles Based on Big Data Analysis
Authors:
Fenyes, Daniel & Nemeth, Balazs & Asszonyi, Mate & Gáspár, Péter
Title of journal:
2018 26th Mediterranean Conference on Control and Automation (MED)
DOI:

10.1109/MED.2018.8443010

2018 (published)
Trochoid milling of carbon fibre-reinforced plastics (CFRP)
Authors:
Geier, Norbert & Szalay, Tibor & Biró, István
Title of journal:
Procedia CIRP, Volume 77, 2018,
DOI:

https://doi.org/10.1016/j.procir.2018.09.039

2018 (published)
Computational method for estimating the domain of attraction of discrete-time uncertain rational systems
Authors:
Polcz, Peter & Péni, Tamás & Szederkényi, Gábor
Title of journal:
European Journal of Control, Volume 49
2018 (published)
Anti-Lock Braking Control Design for Electric Vehicles Using LPV Methods
Authors:
B. Németh, M. Fazekas and P. Gáspár
DOI:

10.1109/MED.2018.8442426

ISSN (or eSSN):
Electronic ISSN: 2473-3504
2018 (published)
Transformations for linear parameter varying systems
Authors:
Szabo, Zoltan & Bokor, József.
Title of journal:
IFAC-PapersOnLine, Volume 51, Issue 26.
DOI:

https://doi.org/10.1016/j.ifacol.2018.11.163

2018 (published)
Experimental Investigation on the Single Point Incremental Forming of AlMn1Mg1 Foils using Flat End Tools
Authors:
Najm, Sherwan & Paniti, Imre
Title of journal:
IOP Conference Series: Materials Science and Engineering
DOI:

10.1088/1757-899X/448/1/012032

2018 (published)
Supply chains’ robustness: Challenges and opportunities
Authors:
Monostori, J.
Title of journal:
Procedia CIRP, 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering
DOI:

DOI: 10.1016/j.procir.2017.12.185

ISSN (or eSSN):
ISSN: 2212-8271
2018
Simulation and scheduling of AGV based robotic assembly systems
Authors:
Andor Viharos, István Németh
Title of journal:
IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018)
2018
A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Authors:
Klaudia Kovacs; Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
DOI:

https://doi.org/10.1007/978-3-662-58485-9_10 (published)

2018
INTEGRATING MACHINE TOOL CONDITION MONITORING AND PRODUCTION SCHEDULING IN METAL FORMING
Authors:
Matthias KARNER, Robert GLAWAR, Wilfried SIHN, Kurt MATYAS
Title of journal:
International Conference Management of Technology – Step to Sustainable Production (MOTSP 2018)
2018
The four steps approach of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Authors:
Hecklau, F.; Orth, R.; Kidschun, F.; Nick, G
Title of journal:
ECMLG 14th European Conference on Management Leadership and Governance
2018
A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance
Authors:
Klaudia Kovacs; Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn
Title of journal:
ML4CPS 2018 (Machine Learning for Cyber Physical Systems and Industry 4.0)
2018
Towards joint optimization of product design, process planning and production planning in multi-product assembly
Authors:
3. Tsutsumi, D.; Gyulai, D.; Kovács, A.; Tipary, B.; Ueno, Y.; Nonaka, Y.; Monostori, L
ISSN (or eSSN):
ISSN 0007-8506 10.1016
2018
CONCEPTION AN INTELLIGENT NODE ARCHITECTURE FOR INTRALOGISTICS
Authors:
Gábor Bohács; Dániel Gáspár; Dorina Kánya
Title of journal:
Acta logistica - International Scientific Journal about Logistics
DOI:

DOI: 10.22306/al.v5i2.82

ISSN (or eSSN):
ISSN 1339-5629
2018
Corporate Governance: The evaluation based approach to the governance and business models of the EPIC CoE
Authors:
László Monostori, Botond Kádár, Gábor Nick, András Pfeiffer, Tamás Várgedő, Fabian Hecklau
Title of journal:
ECMLG 14th European Conference on Management Leadership and Governance
2018
New perspectives in production control: situation-aware decision making with machine learning approaches
Authors:
Dávid Gyulai, András Pfeiffer, Viola Gallina
Title of journal:
68th CIRP General Assembly
2018
Lead time prediction in a flow-shop environment with analytical and machine learning approaches
Authors:
Gyulai, D., Pfeiffer, A., Nick, G., Gallina, V., Sihn, W., Monostori, L.
Title of journal:
IFAC INCOM 2018 conference
2018
Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates
Authors:
Geier, Norbert; Szalay, Tibor; Takacs, Marton
DOI:

10.1007/s00170-018-2895-8

2018
A discrete simulation-based algorithm for the technological investigation of 2.5D milling operations
Authors:
Adam Jacso, Tibor Szalay, Juan Carlos Jauregui, Juvenal Rodriguez Resendiz
Title of journal:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
DOI:

DOI:10.1177/0954406218757267

ISSN (or eSSN):
ISSN: 0954-4062
2018
Roadmapping towards industrial digitalization based on an Industry 4.0 maturity model for manufacturing enterprises
Authors:
Andreas Schuhmacher, Tanja Nemeth, Wilfried Sihn
Title of journal:
Procedia CIRP, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering
2018
Lead time prediction using machine learning
Authors:
Lingitz, L., V. Gallina, F. Ansari, D. Gyulai, A. Pfeiffer, W. Sihn, L. Monostori
Title of journal:
CIRP CMS 2018 conference
DOI:

https://doi.org/10.1016/j.procir.2018.03.148

2018
Machinability analysis of carbon fibre-reinforced plastics using compression tools
Authors:
Balázs SOMOSKŐI,Norbert GEIER
Title of journal:
BÁNKI KÖZLEMÉNYEK1.évfolyam 3.szám
2018
Analysing and Optimizing 2.5D Circular Pocket Machining Strategies
Authors:
Jacsó Ádám, Szalay Tibor
Title of journal:
Lecture Notes in Mechanical Engineering
DOI:

DOI: 10.1007/978-3-319-68619-6_34

ISSN (or eSSN):
ISBN:978-3-319-68619-6
2018
Digital Twin in manufacturing: A categorical literature review
Authors:
Werner Kritzinger, Matthias Karner, Georg Traar, Jan Henjes, Wilfried Sihn
Title of journal:
16th IFAC Symposium on Information Control Problems in Manufacturin
2018
Design of the optimal motions of autonomous vehicles in intersections through neural networks.
Authors:
Nemeth, Balazs & Gáspár, Péter & Szőcs, Dávid & Mihály, András
Title of journal:
IFAC-PapersOnLine, Volume 51, Issue 9
DOI:

https://doi.org/10.1016/j.ifacol.2018.07.004

2018
Human–robot collaborative assembly in cyber-physical production: classification framework and implementation
Authors:
Xi Vincent Wang, Zsolt Kemény, József Váncza, Lihui Wang
Title of journal:
CIRP Annals -- Manufacturing Technology
DOI:

10.1016/j.cirp.2017.04.101

2017
The influence of the machining parameters on the quality of the holes made by μEDM in electrically conductive alumina-oxide
Authors:
Balázs Zsolt FARKAS1, László CSORBA Tibor SZALAY, Valery V. KUZIN, Sergei YU. FEDOROV
Title of journal:
SOLID STATE PHENOMENA
DOI:

DOI: 10.4028/www.scientific.net/SSP.261.101

ISSN (or eSSN):
ISSN: 1662-9779
2017
Human Resources Management: Meta-Study – Analysis of Future Competences in Industry 4.0
Authors:
Hecklau, F.; Orth, R.; Kidschun, F.; Kohl, H.
Title of journal:
Proceedings 13th European Conference on Management Leadership and Governance (ECMLG)
2017
Cyber-physical manufacturing in the light of Professor Kanji Ueda's legacy
Authors:
Váncza J, Monostori L
Title of journal:
Procedia CIRP, 50th CIRP CMS Conference
DOI:

10.1016/j.procir.2017.04.059

2017
Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP)
Authors:
Geier Norbert, Szalay Tibor
Title of journal:
Measurement
DOI:

DOI: 10.1016/j.measurement.2017.07.007

ISSN (or eSSN):
ISSN: 0263-2241
2017
Improving the Accuracy of Cycle Time Estimation for Simulation in Volatile Manufacturing Execution Environments
Authors:
Pfeiffer A., Gyulai D., Monostori L.
Title of journal:
ASIM 2017 Conference
ISSN (or eSSN):
ISBN: 978-3-7376-0192-4 (print), ISBN: 978-3-7376-0193-1 (ebook)
2017
Engineering Support Systems for Industrial Machines and Plants
Authors:
Youichi Nonaka, Takahiro Nakano, Kenji Ohya, Atsuko Enomoto, Gábor Erdős, József Váncza, Gergely Horváth
Title of journal:
Advances in Through-life Engineering Services
2017
How to Achieve Physical Internet through Lean Principles and Industry 4.0?
Authors:
Gizem Erboz, Dr. Gábor Bohács, Dr. Zoltán Szegedi
Title of journal:
4. Wissenschaftliche Industrielogistik-Dialog 2017 (WiLD 2017)
ISSN (or eSSN):
ISBN-13: 978-3745016314
2017
An approach for the integration of anticipative maintenance strategies within a production planning and control model
Authors:
Robert Glawar, Matthias Karner, Tanja Nemeth,b, Kurt Matyas, Wilfried Sihn
Title of journal:
Proceedings of 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering
2017
Investigation of Micro Milled Surface Characteristics
Authors:
B Z Balázs, T Szalay, M Takács
Title of journal:
International Conference on Innovative Technologies: IN-TECH 2017
ISSN (or eSSN):
ISSN 0184-9069
2017
Application of generic CAD models for supporting feature based assembly process planning
Authors:
Kardos Cs., Váncza J.
Title of journal:
Procedia CIRP, 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering
2017
Decomposition approach to optimal feature-based assembly planning
Authors:
Kardos Cs., Kovács A., Váncza J.
Title of journal:
CIRP Annals -- Manufacturing Technology
DOI:

10.1016/j.cirp.2017.04.002

2017
Dynamical Aspects of Micro Milling Process
Authors:
M Takács, B Z Balázs, J C Jáuregui
Title of journal:
International Conference on Innovative Technologies: IN-TECH 2017
ISSN (or eSSN):
ISSN 0184-9069
2017
Simulation model study for manufacturing effectiveness evaluation in crowdsourced manufacturing
Authors:
Kaihara T., Katsumura Y., Suginishi Y., Kádár B.
Title of journal:
CIRP Annals -- Manufacturing Technology
DOI:

10.1016/j.cirp.2017.04.094

2017
Conceptual Design of an Integrated Autonomous Production Control Model in association with a Prescriptive Maintenance Model (PriMa)
Authors:
Glawar, Robert; Ansari, Fazel; Kardos, Csaba; Matyas, Kurt; Sihn, Wilfried
Title of journal:
Procedia CIRP, Volume 80
DOI:

https://doi.org/10.1016/j.procir.2019.01.047

2019
The four-step approach for the creation of the HR Concept for the EPIC Centre of Excellence in Production Informatics and Control (EPIC CoE)
Authors:
Hecklau, Fabian; Orth, Ronald; Kidschun, Florian; Nick, Gabor
ISSN (or eSSN):
ISBN 9781912764020; 9781912764013
Analyzing the Role of Research and Technology Organizations (RTOs) in National Innovation Systems (NIS)
Authors:
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Title of journal:
ECMLG 2020 - 16th European Conference on Management Leadership and Governance
ISSN (or eSSN):
ISBN 1912764776, 9781912764778
Detection filter design for homogeneous multi-agent networks.
Authors:
Szabo, Zoltan & Bokor, József & Hara, S.:
Title of journal:
IFAC-PapersOnLine, Volume 51, Issue 24
DOI:

https://doi.org/10.1016/j.ifacol.2018.09.635

Effect of cutting parameters on section borders of the empirical specific cutting force model for cutting with micro-sized uncut chip thickness
Authors:
Biró, István & Szalay, Tibor & Geier, Norbert
Title of journal:
Procedia CIRP, Volume 77
DOI:

https://doi.org/10.1016/j.procir.2018.09.015

Structured Analysis of Methodologies for the Assessment of the Technological Capability of RTOs – Using a Method Engineering Approach
Authors:
Hecklau, F.; Kidschun, F.; Kohl, H.; Tominaj, S.
Title of journal:
ECIE 2020 - 15th European Conference on Innovation and Entrepreneurship
ISSN (or eSSN):
ISBN 1912764687, 9781912764686